TUBOLITO ROAD inner tube 700x18/28C SV42 38g

TUBOLITO ROAD inner tube 700x18/28C SV42 38g

Tubolito is a unique ultra-light tube that is lighter and more durable thanks to an innovative material. Compared with a classic tube it has significantly higher pinch-flat resistance and a weight saving of 60%! Another huge advantage is that, compared with, for example, la

• super-light, ideal for weight weenies, weight 38 g !
• lightweight 38 g !
• suitable for rim and disc brakes
• SV 42 mm and SV 60 mm
• holds air better than a silicone tube
• similar air retention as normal rubber tube
• Fit it to the rim with the Tubolito inflated to 0.5 bar. Inflate to this value outside the rim and make sure the valve points inwards so that the material is not unnecessarily stressed.

FAQ

• Lighter and more durable thanks to an innovative material.
• Twice as puncture-resistant in the needle test under pressure.
• It can easily be patched with Tubolito patches.
• It can be used in tyres that contain sealant.
• Holds air just like a classic tube.
• Slightly better resistance in the pinch-flat test compared with a classic tube.
• Compared with the classic TUBO-MTB, the S-TUBO has a removable valve core and a thinner wall for better packability as a spare tube. It therefore fits easily in any pocket. The weight stopped at 45 g for the 29 inch version and the durability is nevertheless at the level of a classic tube.
• The Tubolito can be used with valve extenders.
• The Tubolito MTB can only be used with disc brakes. The Tubolito Road can be used on the road with both rim and disc brakes. The Tubolito Road passed the DIN4210 test (15 minutes of braking with 10x10 sec interruption) on both aluminium and carbon rims.
• In a test of continuous braking until a puncture occurs, the Tubolito did not lose pressure explosively like a classic tube, but suffered a slow puncture.
• The rolling resistance of the Tubolito MTB is 4.6 W lower at a speed of 28.8 km/h than that of a classic tube.
• The rolling resistance of the Tubolito Road is 2.3 W lower at a speed of 28.8 km/h than that of a classic tube.
• The maximum and minimum pressure follows the limit of the tyre used.
• Fit it with the Tubolito inflated to 0.5 bar. When inflating to this value make sure the valve points towards the inner part of the circle.
• The Tubolito can be used on other bikes if they have the same diameter and width.
• The Tubolito can be temporarily inflated with CO2, but it is recommended to deflate it immediately after the ride and inflate it with regular air.

  model year:

  nespecifikován