Muc-Off sealant No Puncture 140 ml

Muc-Off sealant No Puncture 140 ml

No Puncture Hassle delivers great performance even in the toughest racing conditions. Cutting-edge microfibre molecules fill larger holes while top-quality latex instantly forms a strong seal. Our formula also contains a unique UV detection system that alerts you to any defect you did not even notice during your ride.

Developed with the worlds best downhill riders and professional road teams to give you the best sealant for tubeless tyres.

It is non-corrosive, biodegradable and easily rinsed off with water. Usable for tubeless-ready rims. Works from 15psi to 120psi and at temperatures from -20 °C to +50 °C.

• For Downhill / Enduro / MTB / Road bikes
• Seals holes up to 6 mm wide
• Seals porous tyres and gaps between the rim bead lip and the tyre
• Lasts up to 6 or more months in a mild climate *, does not dry out and does not form lumps
• Works from 15psi to 120psi
• Contains cutting-edge microfibre molecules that fill large holes
• Includes a unique UV detection system that alerts you to any puncture
• Biodegradable, non-corrosive and easily washed off with water
• Ammonia-free
• Compatible with CO2

* In extreme heat (+35 °C and above) simply top up if necessary.

MINIMUM AMOUNT PER TYRE:

(add up to 30 ml extra for increased protection)

• Road: 30-45ml (2 to 3 measures)
• 26 "MTB and 27.5": 60-75ml (4 to 5 measures)
• Cross 700c: 60-75ml (4 to 5 measures)
• 29 "MTB: 105ml-140ml (7 measures or the whole pouch)
• Downhill: 120-140 ml (8 measures or the whole pouch)

INSTRUCTIONS FOR USE – 140ML KIT

1. Shake the contents of the pouch thoroughly before use.

2. If possible, place the bike in a workstand.

3. Remove the Presta valve core using the supplied tool (if you have a non-removable valve core, simply pour or use a measure so that it is applied directly into your unseated tyre, and refit).

4. With the valve at the 12 oclock position, fit the pouch onto the valve and, by hand without using the pedals, turn the valve to the 6 oclock position.

5. Squeeze the required amount and fold the pouch to the required fill line, refit the valve core and inflate the tyre according to the manufacturers recommendation.

6. Repeatedly rotate the wheel, shake it from side to side and now you are ready to go.

7. Check the amount in each tyre regularly and simply top up as needed.