Smart front light Rays E-bike

Smart front light Rays E-bike

Product description

The light is derived from the popular rechargeable light SMART RAYS 150 – the recommended power supply is a connection to an e-bike battery, e.g. via a USB connector. The light can be powered from any DC source with a voltage of 6 - 48Volt.

It was developed for e-bikes with a USB connector output of 6 - 48V, but this is not a requirement. It can be connected to any source (battery) with a direct voltage of 6 to 48Volt or to a DC "dynamo".

The aluminium body of the light is also a highly efficient heat sink

LED type - CREE High-Brightness LED, with an effective output of 1.8W.

Power supply 6 - 48V

Light intensity: 25 Lux

100% waterproof, IP66 standard

Use: for mounting on the front fork of an e-bike – the bracket is included with the light

colour Black

Weight: 78 grams

Manufacturer: SMART CO., LTD., TAIWAN, R.O.C.

The light is offered as OEM, intended for installation by a professional service.

The light should be installed 400 to 1200 mm above the road and adjusted so that the centre of the light cone at a distance of 5 m is at half the height of the upper edge of the reflector.

The package includes the light, a 140 cm 2 -core cable without a connector, and a metal bracket for the fork crown.

To mount on the front fork of an e-bike, use only the supplied bracket. Tighten the screws properly to prevent the light from coming loose accidentally.

The package includes the light, a 140 cm 2 -core cable without a connector and a metal bracket for the fork crown.

Wiring: connect + (plus) to the red wire and - (minus) to the black one.

If you connect the light the wrong way round, it is protected and you will not destroy it – it simply will not light.

Additional mounting material is not included.