Zeroflats TEKNIC 250 ml

Zeroflats TEKNIC 250 ml

Anti-puncture milk designed primarily for use in tubes.

Suitable for E-BIKE

INSTALACE

To seal a 1 wheel you need 60ml of Zero flats milk. For tubes or tubulars, unscrew the valve core and install the milk directly into the tube with an injector. If the valve core cannot be removed, loosen the valve and install the milk through the valve. If you use Tubeless, TNT or Tubeless Ready tyres, a workshop pump or CO2 is enough. Mount the tyre on the rim and inflate it so that the tyre beads seat in the rim. Then unscrew the valve, pour in 60ml of Zero flats and inflate to the required pressure. When installing regular tyres the procedure is the same, but you will need a compressor for inflation.