PEATYS X CHRIS KING (MK2) tubeless valves - 80mm (RED)

PEATYS X CHRIS KING (MK2) tubeless valves - 80mm (RED)

Do you have deep rims, ride tubeless and want to fine-tune your bikes to perfection? Then there are the MK2 tubeless valves in twelve colour shades to choose from!

The Peatys x Chris King MK2 tubeless valves with a length of 80 mm are designed for deep rims and tubeless systems of road, gravel, cyclocross and mountain bikes. The valve body is made of strong and lightweight 7075 aluminium alloy, which easily withstands demanding handling.

The valve base is fitted with a cross-shaped X outlet. Four side channels allow free passage of air and sealant into the tyre, even when a protective insert sitting directly on the lower part of the valve is installed inside the rim.

The soft conical rubber base in combination with the sealing O-ring under the aluminium nut guarantees reliable sealing of the rim and prevents it from being scratched during tightening. The aluminium caps also serve as practical tools:

• the first cap contains a key for removing the core of the Presta valve for easy topping up of sealant
• the second cap serves as a truing key for standard 3.4 mm wheel spoke nipples

The valves are fully serviceable – worn parts can be replaced at any time using the Service Kit or colour-customised with the Accessory Kit sets.

Installation procedure:

• Remove the cap, lock nut and sealing O-ring.
• Insert the valve into the valve hole from the inner side of the rim.
• From the outer side of the rim, put the sealing O-ring onto the valve stem.
• Screw on the lock nut by hand and tighten it firmly.
• Screw on the protective cap.