Max1 rear light Pop USB

Max1 rear light Pop USB

Lightweight MAX1 Pop rear USB flasher with COB LEDs. Mounting on the saddle rails or on the seatpost.

Specifications:

• 20× high-brightness COB LED - 30 lm

• rechargeable lithium-polymer battery 3.7 V, 400 mAh

• water resistance: IPX5

• functions: flashing (3 modes), steady light (3 modes)

• visibility up to 400 m

• charging via USB-C (cable included in the pack)

• charging time: approx. 2.5 - 3 h

• run time up to 7 h (depends on the selected mode and ambient conditions)

• flasher dimensions: 3 x 4 cm (diameter × depth)

• weight only 29 g (including the mount)

2 mounting options:

1. on the seatpost - universal silicone-rubber mount - easy tool-free installation

2. on the saddle rails - the mount is fitted with cable ties (included in the pack)

charging status indicator

• charging – flashes • charged – lit

low battery indicator

the light starts to flash – low battery

lighting modes

• 100% intensity, 50% intensity, 25% intensity

flashing modes

Controls

• holding the button for more than 2 switches the light on/off

• a slow press of the button switches between modes in the lighting or flashing mode

• the mode and flashing are changed during operation by pressing the button quickly 2x

Recommendations and information on using the light:

The batteries have no memory effect, so charge them to the maximum after every use without worry. If you discharge it to the minimum, charge it as soon as possible. Storing a completely discharged light shortens the life of the batteries. If you do not use the light, the manufacturer recommends checking the battery in the light at least 1× per 3 months and recharging it if necessary. The electronics fully control charging and discharging, including battery status indication, and protect the battery from overcharging and complete discharge. Keep the light under supervision while charging, do not cover it and do not place it on flammable materials.