Max1 rear light Cobo USB

Max1 rear light Cobo USB

Ultra-lightweight MAX1 Cobo rear USB flasher with 10 COB LEDs and 8 lighting modes. Thanks to the rubber mount attachment system you can fit the flasher to a bike, walking poles, a pram, etc.

Technical parameters:

• 10× high-brightness COB LED - 30 lm

• rechargeable lithium-polymer battery 3.7 V / 330 mAh

• water resistance: IPX4

• functions: flashing (4 modes), steady light (4 modes)

• visibility up to 600 m

• charging via Micro-USB (cable included in the pack)

• charging time: approx. 3 h

• run time up to 14 h (depends on the selected mode and ambient conditions)

• universal mount with a rubber strap for seatposts of 22.2 - 31.6 mm

• flasher dimensions: 7 × 2 × 1.3 cm (h×w×d)

• weight only 34 g (including the mount)

Charging status indicator

• charging – flashes • charged – lit

Low battery indicator

the light starts to flash – low battery

Lighting modes

• economy mode - 30% output • low light - 30% output

• medium light - 50% output • high beam - 100% output

Flashing modes

• slow flashing with a weak flash • slow flashing with a medium-strong flash

• slow flashing with a fast flash • fast flashing with a medium beam

Controls

• a slow press of the button switches between modes in the lighting or flashing mode

• a quick double press of the button switches between the lighting and flashing modes and back

• holding the button for more than 2 s switches the light off

Recommendations and information on using the light:

The batteries have no memory effect, so charge them to the maximum after every use without worry. If you discharge it to the minimum, charge it as soon as possible. Storing a completely discharged light shortens the life of the batteries. If you do not use the light, the manufacturer recommends checking the battery in the light at least 1× per 3 months and recharging it if necessary. The electronics fully control charging and discharging, including battery status indication, and protect the battery from overcharging and complete discharge. If you use the light for anything other than cycling, never cover it. Keep the light under supervision while charging, do not cover it and do not place it on flammable materials.