Max1 rear light Ilumi 2.0 USB

Max1 rear light Ilumi 2.0 USB

Lightweight MAX1 Ilumi 2.0 rear USB flasher with COB LEDs and an AUTOSTOP function.

Do you forget to switch the light off after stopping? That is why we equipped this light model with the AUTOSTOP function, which switches the light off by itself after 4 minutes without movement and switches it on again by itself when you set off.

Specifications:

• 20× high-brightness COB LED - 30 lm

• rechargeable lithium-polymer battery 3.7 V

• water resistance: IPX4

• functions: flashing (3 modes), steady light (2 modes)

• AUTOSTOP function

• visibility up to 600 m

• charging via USB-C (cable included in the pack)

• charging time: approx. 3 h

• run time up to 7 h (depends on the selected mode and ambient conditions)

• universal silicone-rubber mount - easy tool-free installation

• dimensions: 7 × 1.5 × 3 cm (h×w×d)

• weight only 34 g (including the mount)

charging status indicator

• charging – flashes • charged – lit

low battery indicator

the light starts to flash – low battery

lighting modes

• 100% output • 50% output

flashing modes

• slow flashing with a weak flash

• pulse flashing

• slow flashing with a fast flash

Controls

• a slow press of the button switches between modes in the lighting or flashing mode

• holding the button for more than 2 seconds switches the light on/off

• holding the button for more than 10 seconds activates/deactivates the AUTOSTOP mode

Recommendations and information on using the light:

The batteries have no memory effect, so charge them to the maximum after every use without worry. If you discharge it to the minimum, charge it as soon as possible. Storing a completely discharged light shortens the life of the batteries. If you do not use the light, the manufacturer recommends checking the battery in the light at least 1× per 3 months and recharging it if necessary. The electronics fully control charging and discharging, including battery status indication, and protect the battery from overcharging and complete discharge. Keep the light under supervision while charging, do not cover it and do not place it on flammable materials.