Tannus sealant MTB 250 ml

Tannus sealant MTB 250 ml

Tubeless sealant with a specific performance formula for MTB and Gravel.

• Compatible with tubeless, tubeless-ready and standard tyres (inside the tube, as prevention)
• Cap suitable for removing the valve core
• Sealant can be applied directly from the bottle
• Free of ammonia and solvents
• Temperature range -10°/+70° degrees
• Compatible with CO2
• Effective for holes (punctures) of up to 8-10 mm

Recommended amount for TANNUS inserts

• Without an insert - 60 ml
• Tannus Tubeless LITE insert - 60 ml
• Tannus Tubeless PRO insert - 120 ml
• Tannus Tubeless FUSION (Lite+Pro) - 250 ml

Instructions for use

1. Fit one side of the tyre onto the rim and make sure the valve is at the bottom.

2. Shake the bottle thoroughly and then pour the specified amount into the tyre.

3. Finish fitting the tyre onto the rim. We recommend starting on the side opposite the valve and rotating the tyre during fitting until the valve is at the top of the tyre.

4. Inflate the tyre until the bead is correctly seated on the rim. Adjust the tyre pressure according to your riding preferences.

5. Rotate and bounce the tyre so that the sealant is spread evenly

Instructions for valves with a removable core

1. Remove the valve core.

2. Shake the latex well. Remove the top part of the cap and then inject the tubeless sealant directly through the valve from the bottle.

3 Reinstall the valve core and follow the inflation instructions (instructions from step 4).