Kenny replacement lenses TRACK/TRACK+ Tear-off lenses

Kenny replacement lenses TRACK/TRACK+ Tear-off lenses

KENNY TRACK/TRACK+ Tears Off Lenses – tear-offs for motocross goggles

KENNY TRACK/TRACK+ Tears Off Lenses are replacement tear-offs designed for KENNY TRACK and TRACK+ motocross goggles. They are a practical accessory for riders who need to quickly remove mud, dust and other dirt from their field of vision while riding, without having to stop and clean the goggle lens.

In motocross, enduro and other off-road disciplines, your vision can be significantly impaired within moments by mud, water or dirt thrown up by other riders. Tear-off films, also known as tear-off, allow you to restore a clear view simply by removing the dirty top layer.

KENNY TRACK/TRACK+ Tears Off Lenses are a practical accessory for both competitive and recreational riders who use compatible KENNY motocross goggles and want to be prepared for demanding off-road conditions.

Quick restoration of a clear view

The main advantage of KENNY TRACK/TRACK+ tear-offs is the ability to quickly remove dirt from your field of vision.

When riding in mud, the surface of the goggles can be covered with a layer of dirt within a short time.

Wiping the lens by hand can be impractical and, in the presence of abrasive particles, can lead to scratching.

Tear-offs create a removable layer in front of the lens. Once the top film gets dirty, the rider can tear it off and reveal the cleaner layer underneath.

This way of using them is especially popular at motocross races and when riding in demanding terrain.

Designed for KENNY TRACK and TRACK+ goggles

KENNY TRACK/TRACK+ Tears Off Lenses are designed for compatible KENNY TRACK and TRACK+ motocross goggle models.

Correct compatibility is important for proper positioning of the film and its attachment to the lens.

Before purchasing, it is advisable to verify the specific version of your goggles and any requirements for the fastening system.

Tear-offs should not be interchanged with products intended for other model lines unless their compatibility has been confirmed by the manufacturer.

A practical solution for mud

Muddy tracks are among the environments where tear-offs are especially useful.

When riding behind another racer, a large amount of wet soil and other dirt can hit your goggles.

KENNY TRACK/TRACK+ Tears Off Lenses allow you to remove the dirty top layer without having to take the goggles off.

The rider can thus restore their view more quickly and continue riding.

The number of available tear-offs depends on the number of correctly fitted films and their design.

Suitable for motocross races

At motocross races, good visibility is essential for orientation on the track and for safely assessing obstacles.

A dirty lens can make it harder to judge distance, choose a racing line and react to other racers.

KENNY TRACK/TRACK+ Tears Off Lenses are a practical addition to your racing gear.

They allow you to prepare your goggles for conditions in which heavy contamination can be expected.

The use of tear-offs must comply with the rules of the specific race and the organizers requirements.

Use in enduro

Enduro is a discipline in which different surfaces and riding conditions alternate.

Riders may encounter dust, mud, water and small bits of dirt.

KENNY TRACK/TRACK+ Tears Off Lenses can help to quickly restore your view while riding.

They are especially useful in situations where it is not practical to stop to clean your goggles.

Before use, it is advisable to verify whether the tear-off system is permitted in the given race or natural environment.

Protecting the lens surface from direct contamination

Tear-offs create an additional layer in front of the lens of motocross goggles.

As a result, some of the dirt is caught on the film instead of coming into direct contact with the lens surface.

This can reduce the need to frequently wipe the lens itself while riding.

However, KENNY TRACK/TRACK+ Tears Off Lenses do not replace the protective properties of the goggles and are not intended to repair a damaged lens.

After riding, it is important to check the condition of the goggles and clean them in the recommended way as needed.

Option to use multiple layers

Tear-off systems generally allow you to stack several tear-offs on top of one another.

As they gradually get dirty, the individual layers can be removed.

The specific number of films that can be safely used at the same time depends on their construction and the manufacturers recommendation.

Too many layers can negatively affect the optical clarity of your view.

With KENNY TRACK/TRACK+ Tears Off Lenses, it is therefore important to follow the instructions for correct layering and installation.

Simple replacement of a dirty layer

Tear-offs are designed for quick removal of a dirty top layer.

When correctly installed, you can grab the relevant tear-off tab and remove the film.

This reveals the next prepared layer or the lens itself.

KENNY TRACK/TRACK+ Tears Off Lenses are practical for riders who need to react to rapidly changing track conditions.

Before a race, it is advisable to practice handling the films in a safe environment.

The importance of correct installation

Correct fitting of the tear-offs is essential for their function.

The film must be positioned so that it does not restrict your view and is properly attached to the corresponding goggle system.

Incorrect installation can cause unwanted movement of the film, wrinkling or difficulties when tearing it off.

Before riding, it is therefore necessary to verify that KENNY TRACK/TRACK+ Tears Off Lenses are correctly fitted and ready for use.

Recommended installation procedure

When fitting tear-offs, it is important to follow the manufacturers instructions.

General procedure:

1. Prepare compatible KENNY TRACK or TRACK+ motocross goggles.
2. Check the condition of the lens and the fastening elements.
3. Clean the lens according to the manufacturers recommendations.
4. Make sure the surface is clean and dry.
5. Prepare the required number of tear-offs.
6. Place the first film on the lens according to the design of the fastening system.
7. If permitted, add further layers in the recommended order.
8. Check the correct position of the tear-off parts.
9. Verify that the films are not wrinkled and do not restrict your view.
10. Before riding, check that all layers are securely attached.

The exact installation method may vary depending on the design of the goggles and films.

A clear view as part of safe riding

In motocross and enduro, good visibility is important for correctly assessing situations.

A dirty lens can limit your ability to recognize obstacles, bumps or other riders.

KENNY TRACK/TRACK+ Tears Off Lenses help deal with situations where mud and other dirt build up on the surface of the goggles.

However, a tear-off must only be pulled when safe control of the motorcycle can be maintained.

If your view is severely restricted and cannot be safely restored, it is advisable to stop in a safe place.

A practical piece of racing gear

Tear-offs are a consumable accessory for motocross goggles.

For regular training sessions and races, it is advisable to have a sufficient supply of compatible films ready.

KENNY TRACK/TRACK+ Tears Off Lenses are a practical accessory for owners of the corresponding goggle models.

They can be part of your service gear together with spare lenses and other goggle maintenance accessories.

Caring for and storing the tear-offs

It is important to store tear-offs so that they do not get scratched, deformed or dirty.

Before installation, they should be clean and undamaged.

KENNY TRACK/TRACK+ Tears Off Lenses should be stored in a dry environment, protected from mechanical damage.

Damaged or heavily soiled films should not be used if they could impair your vision.

Used films must be disposed of properly and not thrown away on the track or in nature.

Key features

• Brand: KENNY
• Product name: TRACK/TRACK+ Tears Off Lenses
• Product type: protective tear-off films for the lens
• Designation: tear-off
• Intended for: KENNY TRACK and TRACK+ motocross goggles
• Main function: quick removal of a dirty layer from your field of vision
• Use: motocross, enduro and other off-road disciplines
• Suitable conditions: mud, water and heavy dirt
• Installation: on a compatible lens with a corresponding fastening system
• Maintenance: protection against scratching and dirt
• Product character: consumable accessory for motocross goggles

Key benefits

• Quick restoration of your view when the goggles get dirty
• Designed for compatible KENNY TRACK and TRACK+ goggles
• Practical when riding in mud
• Suitable for motocross races
• Also useful for enduro riding
• Allow you to remove the dirty top layer
• Reduce the need to wipe the lens while riding
• Help maintain better visibility in demanding conditions
• A practical piece of racing gear
• Option to prepare multiple layers according to the manufacturers instructions
• A simple solution for regular use with compatible goggles

Use:KENNY TRACK/TRACK+ Tears Off Lenses are tear-offs designed for compatible KENNY TRACK and TRACK+ motocross goggles. They are used to quickly remove mud, water and other dirt from your field of vision while riding. A dirty top film can be torn off to reveal the cleaner layer underneath. They are a practical accessory for motocross races, enduro and other off-road disciplines where the ability to quickly restore visibility is important. Use must be consistent with the design of the goggles and the rules of the specific race or venue.