Kenny VENTURY Tear-off lenses

Kenny VENTURY Tear-off lenses

KENNY VENTURY Tears Off Lenses – tear-offs for motocross goggles

KENNY VENTURY Tears Off Lenses are tear-offs designed for compatible KENNY VENTURY motocross goggles. They are a practical accessory for riders who need to quickly remove mud, dust and other dirt from their view while riding, without having to stop and clean the lens by hand.

In motocross and enduro, the goggle lens can be covered in dirt thrown up by the front wheel or other riders within moments. Tear-offs allow you to quickly remove the dirty top layer and restore visibility through the remaining clean layers and the lens.

KENNY VENTURY Tears Off Lenses are a practical accessory especially for competitive motocross, training on muddy tracks and other off-road activities where goggles get heavily soiled.

Quick removal of dirt while riding

The main function of KENNY VENTURY Tears Off Lenses is to enable quick removal of a dirty film from the lens surface.

When riding behind other racers, mud, water and other dirt can stick to the goggles.

The tear-off system lets the rider remove the top film by pulling on its tab.

This exposes the next clean layer or the lens itself, if no further films are fitted.

The whole system is designed for quick operation while riding, but its use must always suit the current situation on the track and safe control of the motorcycle.

Designed for KENNY VENTURY motocross goggles

KENNY VENTURY Tears Off Lenses are designed for compatible motocross goggles of the KENNY VENTURY series.

Proper compatibility is important for adequate attachment of the films and their correct function.

Tear-offs are usually attached to the corresponding mounting elements of the lens.

Before purchase, you must therefore check whether the specific KENNY VENTURY goggle version supports the tear-off system.

The model series designation alone may not confirm compatibility with all lenses or model years.

A practical solution for motocross

Motocross is one of the disciplines in which goggles are exposed to heavy soiling.

When riding on a wet track, visibility can be quickly limited by mud thrown up by passing motorcycles.

KENNY VENTURY Tears Off Lenses let the rider respond to dirt by removing the top film.

They are therefore a practical accessory especially for races and training sessions where it is important to maintain good visibility of the track.

Suitable for muddy conditions

Mud is among the most common causes of limited visibility when riding off-road.

A layer of dirt can build up on the lens, making it harder to watch for obstacles and other riders.

KENNY VENTURY Tears Off Lenses let you remove the dirty layer together with the film.

This can be practical especially on wet and muddy motocross tracks.

Use in races

In competitive motocross, lighting and surface conditions can change quickly.

Riders often ride in close proximity to other racers and are exposed to flying dirt.

KENNY VENTURY Tears Off Lenses are a practical part of racing gear.

They let you prepare your goggles for situations where you will need to quickly restore visibility while riding.

Before using them in races, it is advisable to check the rules of the particular organizer, as some events may restrict the use of disposable tear-offs.

Option to use multiple layers

Depending on their design, tear-off systems may allow several films to be stacked on top of each other.

The rider can thus remove the individual dirty layers one by one.

KENNY VENTURY Tears Off Lenses are designed for use in a corresponding system of compatible goggles.

The maximum number of films fitted at the same time and the recommended way of layering them must be verified according to the manufacturers instructions.

Too many layers or incorrect installation can negatively affect visibility.

Maintaining good visibility

In motocross, it is important to constantly watch the track surface, corners, jumps and the movement of other riders.

A dirty lens can significantly impair orientation in the terrain.

KENNY VENTURY Tears Off Lenses help in situations where dirt accumulates on the front of the goggles.

Removing the dirty film lets you keep watching the track through a cleaner surface.

Protecting the lens surface from direct contamination

Tear-offs create an additional layer in front of the lens itself.

While riding, they can thus catch part of the mud and other dirt that would otherwise land directly on the lens surface.

As a result, KENNY VENTURY Tears Off Lenses can reduce the need to repeatedly clean the lens while riding.

However, the films are not a substitute for proper goggle maintenance and do not guarantee protection against mechanical damage.

Easy preparation before riding

Before training or a race, it is advisable to prepare your goggles according to the expected conditions.

If heavy mud soiling is likely, it can be practical to fit tear-offs before the start.

KENNY VENTURY Tears Off Lenses must be attached according to the design of the compatible lens and the manufacturers instructions.

After installation, we recommend checking that the films hold properly, do not obstruct your view and that their tabs are accessible.

Recommended installation procedure

When fitting the tear-offs, follow the instructions of the goggle and accessory manufacturer.

General procedure:

1. Prepare a clean and dry work area.
2. Check the compatibility of the films with the lens of your KENNY VENTURY goggles.
3. Verify the condition of the mounting elements of the tear-off system.
4. Gently clean the lens according to the manufacturers recommendations.
5. Prepare the tear-offs for installation.
6. Place the first film onto the corresponding fastening elements.
7. If the system allows it, add further layers according to the manufacturers recommendations.
8. Check the correct position of the tabs.
9. Make sure the films are not wrinkled or deformed.
10. Before riding, check the quality of your vision and the firmness of the attachment.

Do not use excessive force or unsuitable tools during installation.

Correct use while riding

Tear-offs are designed for quick removal of the dirty layer.

When using them, it is important to keep full control of the motorcycle.

The rider should try the system out beforehand and get familiar with the position of the tabs.

Use KENNY VENTURY Tears Off Lenses only when the current situation on the track allows it.

Safe control of the motorcycle always takes priority over handling accessories.

The difference between tear-off and roll-off systems

Motocross goggles can use different ways of removing dirt from your view.

The tear-off system works with separate tear-off films that the rider removes one after another.

The roll-off system uses a continuously advancing strip of film between canisters mounted on the goggles.

KENNY VENTURY Tears Off Lenses are designed for a corresponding tear-off system.

They are not an automatic replacement film for a roll-off mechanism.

A practical addition to a service kit

For regular training sessions and races, it can be useful to have spare tear-offs ready.

KENNY VENTURY Tears Off Lenses can be included in a service kit together with a replacement lens and other compatible motocross goggle accessories.

Before each ride, it is advisable to check that they are properly attached and in good overall condition.

Storage and handling

It is advisable to store the tear-offs in a clean environment where they are not at risk of scratching or deformation.

When handling them, we recommend keeping your hands and work area clean.

Dirty or damaged films can negatively affect your vision.

During transport, it is advisable to protect the accessories from contact with sharp objects and excessive pressure.

Respect for the environment

Tear-offs can remain on the track after being removed during riding.

It is therefore important to respect the rules of the organizer, the venue operator and local regulations.

Where the use of disposable films is restricted or prohibited, you must choose a permitted solution.

It is advisable to collect used films and dispose of them appropriately.

Key features

• Brand: KENNY
• Product name: VENTURY Tears Off Lenses
• Product type: tear-offs for motocross goggles
• System: tear-off
• Intended for: compatible KENNY VENTURY motocross goggles
• Main function: quick removal of a dirty layer from your field of vision
• Use: motocross and other suitable off-road disciplines
• Suitable conditions: especially muddy and dirty tracks
• Installation: on a compatible lens with a corresponding fastening system
• Operation: removing a dirty film using the tab
• Storage: protection against scratching and deformation
• Product character: motocross goggle accessory

Key benefits

• Practical tear-offs for motocross goggles
• Designed for compatible KENNY VENTURY models
• Let you quickly remove the dirty layer
• Help restore your vision when riding in mud
• Practical for competitive motocross
• Suitable for training on wet tracks
• Reduce the need to manually clean the lens while riding
• Allow you to prepare your goggles for demanding conditions
• Can catch dirt before it reaches the lens itself
• A practical addition to your race and service gear
• Simple principle of use via a tear-off tab

Use:KENNY VENTURY Tears Off Lenses are tear-offs designed for compatible KENNY VENTURY motocross goggles. They allow quick removal of mud and other dirt from your view while riding and are a practical accessory especially for motocross races and training in demanding conditions. Before use, you must verify compatibility with the lens, correct attachment and the rules of the particular race or venue.