Kenny PERFORMANCE Tear-off lenses

Kenny PERFORMANCE Tear-off lenses

KENNY PERFORMANCE Tears Off Lenses – tear-offs for motocross goggles

KENNY PERFORMANCE Tears Off Lenses are tear-off films designed for KENNY PERFORMANCE motocross goggles with a compatible tear-off mounting system. They are a practical accessory for riders who need to quickly clear mud, water and other dirt from their view while riding, without having to stop and clean the lens by hand.

In motocross and enduro, goggles can be covered in dirt from the front wheel or other riders within moments. Tear-offs let you remove the dirty top layer with a simple motion and reveal the cleaner surface underneath.

KENNY PERFORMANCE Tears Off Lenses are a practical accessory especially for competitive motocross, training on wet tracks and other off-road activities where it is important to maintain good visibility even in demanding conditions.

Quickly restoring visibility while riding

The main function of KENNY PERFORMANCE Tears Off Lenses is to allow the dirty film to be quickly removed from the front of the lens.

When riding behind other racers, mud, water and small dirt can build up on the goggles.

If a compatible tear-off system is correctly installed on the lens, the rider can pull the tab to remove the dirty top layer.

This reveals the next clean film or the lens itself.

This principle makes it possible to react quickly to impaired visibility without having to take the goggles off while riding.

Designed for KENNY PERFORMANCE goggles

KENNY PERFORMANCE Tears Off Lenses are designed for compatible motocross goggles from the KENNY PERFORMANCE range.

Correct compatibility is essential for the films to be properly attached and to work.

Tear-offs are usually installed on the relevant mounting elements located on the goggle lens.

Before purchase, we recommend checking the exact goggle model designation and the compatibility of the specific lens with the tear-off system.

The films should not automatically be interchanged with accessories for other model ranges.

Practical for competitive motocross

Motocross is one of the disciplines in which goggles get very dirty.

When riding in a group, dirt from other motorcycles can hit the lens.

KENNY PERFORMANCE Tears Off Lenses are a practical solution for situations where the dirty layer needs to be removed quickly.

They can be especially useful at races, where stopping to clean your goggles means losing time.

Suitable for muddy conditions

On wet and muddy tracks, visibility can deteriorate significantly within a short time.

Mud sticking to the lens can make it difficult to watch obstacles, corners and the movement of other riders.

KENNY PERFORMANCE Tears Off Lenses let you remove the dirty film and reveal a cleaner layer.

They are therefore a practical addition to your gear for riding in demanding surface conditions.

Use in training

Tear-offs are not intended only for racing.

They also come in useful in training, especially on wet or heavily soiled tracks.

KENNY PERFORMANCE Tears Off Lenses let you prepare your goggles for situations where the lens may repeatedly get dirty.

In training, the rider can also learn how to handle the tear-off system correctly.

Option to remove layers gradually

Some tear-off systems allow several films to be installed on top of each other.

The rider can thus remove individual dirty layers one by one as needed.

KENNY PERFORMANCE Tears Off Lenses are designed for use with a corresponding system of compatible goggles.

The number of films fitted at the same time must match the manufacturers recommendation.

Incorrect layering or an excessive number of films can impair visibility.

Limiting direct soiling of the lens

Tear-offs create an additional layer in front of the lens itself.

While riding, they catch some of the mud, water and other dirt that would otherwise land directly on its surface.

KENNY PERFORMANCE Tears Off Lenses can reduce the need to repeatedly clean the lens by hand while riding.

However, the films do not replace proper maintenance of the goggles and do not guarantee protection against mechanical damage.

Good visibility when riding off-road

In motocross, it is important to constantly watch the track surface, corners, jumps and other riders.

A dirty lens can significantly limit your orientation in the terrain.

KENNY PERFORMANCE Tears Off Lenses help deal with situations where dirt builds up on the front of the goggles.

Removing the dirty film lets you keep watching the track through a cleaner surface.

Simple principle of use

The tear-off system works by removing a single film using the pre-prepared tab.

This means the rider does not have to use cleaning products or wipe the lens with a glove while riding.

KENNY PERFORMANCE Tears Off Lenses are a practical solution, especially in environments where goggles get dirty quickly.

Before use, it is important to familiarize yourself with the correct position of the tabs and how the system works.

Preparing the goggles before the start

Before a race or training session, it is advisable to prepare the goggles according to the expected conditions.

If heavy mud contamination is likely, tear-offs can be a useful part of your gear.

KENNY PERFORMANCE Tears Off Lenses must be installed according to the design of the compatible lens and the manufacturers instructions.

After fitting, we recommend checking that they are securely attached, the position of the tabs and the quality of your vision.

Recommended installation procedure

When fitting the tear-offs, follow the instructions of the goggle and accessory manufacturer.

General procedure:

1. Prepare a clean and dry work area.
2. Verify that the tear-offs are compatible with the lens of your KENNY PERFORMANCE goggles.
3. Check the condition of the fastening elements of the tear-off system.
4. Gently clean the lens according to the manufacturers recommendations.
5. Prepare the tear-offs for installation.
6. Place the first film onto the corresponding fastening elements.
7. If the system allows it, add further layers according to the manufacturers instructions.
8. Check that the tear-off tabs are positioned correctly.
9. Make sure the films are not wrinkled or deformed.
10. Before riding, check the quality of your vision and the firmness of the attachment.

Do not use excessive force or unsuitable tools during installation.

Safe use while riding

Tear-offs allow quick handling, but using them must not impair safe control of the motorcycle.

The rider should try out the system beforehand and know the position of the tabs.

Use KENNY PERFORMANCE Tears Off Lenses only in situations where a film can be removed without endangering control of the motorcycle.

Safe handling of the motorcycle and watching the track always take priority.

The difference between tear-off and roll-off systems

Motocross goggles can use various systems for removing dirt from the field of vision.

The tear-off system uses individual tear-off films that are removed one after another.

The roll-off system uses a continuous film strip that moves between canisters.

KENNY PERFORMANCE Tears Off Lenses are designed for a corresponding tear-off system.

They are not a replacement film strip for a roll-off mechanism.

Compatibility with different lenses

Some motocross goggle model lines offer multiple lens variants, for example clear, smoke or mirrored versions.

However, compatibility with tear-offs depends on the specific design and fastening system.

Use KENNY PERFORMANCE Tears Off Lenses only with lenses for which the manufacturer confirms their use.

A lens merely belonging to the PERFORMANCE line does not necessarily guarantee support for the tear-off system.

A practical part of your service gear

For regular training sessions and races, it can be useful to have spare tear-offs ready.

KENNY PERFORMANCE Tears Off Lenses can be included in your service gear together with a spare lens and other compatible motocross goggle accessories.

Before every ride, it is advisable to check the condition of the films and that they are securely attached.

Storage and handling

It is advisable to store the tear-offs in a clean environment where they are not at risk of scratching or deformation.

When handling them, we recommend keeping your hands and work area clean.

Dirty or damaged films can negatively affect your vision.

During transport, it is advisable to protect the accessory from sharp objects and excessive pressure.

Respect for the environment

Disposable tear-offs may be left on the track after being removed during a ride.

It is therefore important to respect the rules of the race organizer, the venue operator and local regulations.

Some races or tracks may restrict or prohibit the use of disposable tear-off films.

It is advisable to collect used films and dispose of them appropriately.

Key features

• Brand: KENNY
• Product name: PERFORMANCE Tears Off Lenses
• Product type: tear-offs for motocross goggles
• System: tear-off
• Intended for: compatible KENNY PERFORMANCE goggles
• Main function: quick removal of a dirty layer from your field of vision
• Use: motocross and other suitable off-road disciplines
• Suitable conditions: especially muddy and dirty tracks
• Installation: on a compatible lens with a corresponding fastening system
• Operation: removing a dirty film using the tab
• Storage: protection against scratching and deformation
• Product character: motocross goggle accessory

Key benefits

• Practical tear-offs for motocross goggles
• Designed for compatible KENNY PERFORMANCE models
• Allow quick removal of a dirty layer
• Help restore your vision when riding in mud
• Practical for competitive motocross
• Suitable for training on wet tracks
• Reduce the need to manually clean the lens while riding
• Allow you to prepare your goggles for demanding conditions
• May catch dirt before it reaches the lens itself
• A practical addition to your race and service gear
• Simple to use thanks to the tear-off tab

Use:KENNY PERFORMANCE Tears Off Lenses are tear-offs designed for compatible KENNY PERFORMANCE motocross goggles. They allow quick removal of mud and other dirt from your field of vision while riding and are a practical accessory especially for motocross races and training in demanding conditions. Before use, it is necessary to verify compatibility with the lens, secure attachment and the rules of the specific race or venue.