How to Assemble a Kids’ Bike

You have received a box containing your bicycle, approximately 130 x 75 x 20 cm in size.

Inside the box, you will find the packaged kids’ bike and a small box with accessories.

Remove all packaging materials from the bike (zip ties, foam, cardboard, and plastic covers) and prepare the parts from the accessory box.

Insert the stem with the mounted handlebars into the fork steerer tube and adjust the handlebar height (the minimum insertion depth is marked on the stem. If the stem is not inserted deep enough, it may break).

Tighten the stem using a 6 mm Allen key.

Install the pedals using a 15 mm wrench. Note: right pedal = right-hand thread, left pedal = left-hand thread — they cannot be interchanged. Tighten both pedals in the direction of pedaling.

Pedal Installation Guide

Before you begin, make sure you have the following:

• 15 mm wrench (or suitable Allen key if the pedals have an internal hex fitting)
• Grease
• Right and left pedal (marked “R” and “L” on the axle)

Instructions:

1. Identify the right and left pedals:

   • The right pedal is marked “R” (right) – install on the right side of the bike (chain side).
   • The left pedal is marked “L” (left) – install on the left side.
   • Note: the right pedal has a right-hand thread, and the left pedal has a left-hand thread.

2. Grease the pedal threads:
   Apply a thin layer of grease to the threads of both pedals to prevent seizing and corrosion.

3. Screw in the pedals by hand:
   Start threading by hand — the pedal should engage smoothly:

   • Right pedal: tighten clockwise (in the riding direction).
   • Left pedal: tighten counterclockwise (also in the riding direction).

4. Tighten with a wrench:
   Use a 15 mm wrench and tighten both pedals firmly in the riding direction.

Note: Incorrect installation or cross-threading can cause irreversible damage to the crank arms.
Never use force during assembly — if the pedal does not thread in smoothly by hand, check the thread alignment.

Assembled kids’ bike.