Marin Alpine Trail Carbon 2 (black/silver)

Marin Alpine Trail Carbon 2 (black/silver)

BIG ALL-MOUNTAIN DAYS WHERE TRAVEL AND GEOMETRY TAKE CENTRE STAGE

BUILT FOR ROUGH TREATMENT AND WILD RIDING

ENDURO RIDING AND RACING

BIG BIKE, BIG WHEELS, BIG FUN

Geometry

All lengths in millimetres

Suspension Setup

REAR SHOCK SET UP

Recommended Sag = 30%/19.5mm

Step 1: Set correct pressure in rear shock.

Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).

Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.

Step 4: Measure sag (from o-ring to seal of shock). If it does not match the bikes recommended sag in millimetres, repeat the process.

Step 5: Adjust the rebound setting to ensure proper control.

FORK SET UP

Marin recommends that front and rear suspension on all bikes feel balanced

Step 1: After rear sag is set, follow the recommended pressure from the fork manufacturer.

Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced. If the front does not match the rear, add or release pressure.

Step 3: Once the bike feels balanced, adjust the rebound damping to ensure proper control.

Fox Float X

Additional information