Marin Alpine Trail E (blue/black)

Marin Alpine Trail E (blue/black)

The Marin Alpine Trail E offers the fun and freedom of eMTB at a very attractive price, because why should only the wealthiest riders have a good time?

We have created an eMTB capable of big mountains that is arguably the best-value eMTB in the world. It is equipped with a powerful Shimano EP6 drive, X-Fusion suspension, a 10-speed Shimano drivetrain, Vee Tire Co. tyres, quality Marin components and a long-lasting internal battery with a capacity of 504 Wh. The overall impression is completed by strong 4-piston TRP brakes with 203 mm rotors.

Geometry

All lengths in millimetres

Suspension Setup

REAR SHOCK SETUP

Recommended Sag = 30%/19.5mm

Step 1: Set correct pressure in rear shock.

Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).

Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.

Step 4: Measure sag (from o-ring to seal of shock). If it does not match the bikes recommended sag in millimetres, repeat the process.

Step 5: Adjust the rebound setting to ensure proper control.

FORK SETUP

Marin recommends that front and rear suspension on all bikes feel balanced

Step 1: After rear sag is set, follow the recommended pressure from the fork manufacturer.

Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced. If the front does not match the rear, add or release pressure.

Step 3: Once the bike feels balanced, adjust the rebound damping to ensure proper control.

X-Fusion 02 PRO RXC

Additional information