Marin Alpine Trail Carbon 2 (čierna/strieborná) celoodpružené horské kolo 29er

Marin Alpine Trail Carbon 2 (čierna/strieborná)

VELKÉ ALL-MOUNTAIN DNY, KDE ZDVIH A GEOMETRIE HRAJÍ HLAVNÍ ROLI

VELKÉ ALL-MOUNTAIN DNY, KDE ZDVIH A GEOMETRIE HRAJÍ HLAVNÍ ROLI

POSTAVENO PRO DRSNÉ ZACHÁZENÍ A DIVOKOU JÍZDU

ENDURO JÍZDA A ZÁVODĚNÍ

VELKÉ KOLO, VELKÁ KOLA, VELKÁ ZÁBAVA

Geometry

All lengths in millimeters

Suspension Setup

REAR SHOCK SET UP

Recommended Sag = 30%/19.5mm

Step 1: Set correct pressure in rear shock.

Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).

Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.

Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.

Step 5: Adjust rebound setting to ensure proper control.

FORK SET UP

Marin recommends that all bikes front and rear suspension feel balanced

Step 1: After rear sag is set follow the recommended pressure from the fork manufacture.

Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.

Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.

Fox Float X

Doplňující informace