Marin Rift Zone E (šedá/modrá) horské elektrokolo

Marin Rift Zone E (šedá/modrá)

Marin Rift Zone E je jedno z nejvýhodnějších eMTB na trhu, které nabízí obrovský výkon, aniž by zatížilo váš rozpočet.

HORSKÁ CYKLISTIKA S PODPOROU

VŠESTRANNÉ ELEKTRICKÉ MTB

MAXIMALIZACE ZÁBAVY

Marin Rift Zone E je jedno z nejvýhodnějších eMTB na trhu, které nabízí obrovský výkon, aniž by zatížilo váš rozpočet. O odpružení se starají RockShox a X-Fusion, spolehlivý 10rychlostní pohon Shimano Deore dodává sílu, a pohonná jednotka Shimano STEPS EP6 vás pohání do kopce, po rovině i z kopce. Standardně je vybavená baterií o kapacitě 504 Wh, s možností upgradu na mohutnější 630 Wh pro ještě větší dojezd.

Geometry

All lengths in millimeters

Technology

SERIES 4 ALUMINUM FRAME

Rift Zone E models are built upon our Series 4 aluminum frames, with detailed forgings, highly manipulated tubes, and full internal cable routing, giving the rider the highest-end alloy frame that Marin offers, compatible with modern coil or air shocks.

MULTITRAC SUSPENSION

The Alpine Trail E features the same great, proven MultiTrac suspension technology, but optimized for the Shimano STEPS system, with 140mm of suspension for the best on-trail experience.

SHIMANO STEPS

Shimano’s STEPS system is both powerful and lightweight, with the mid-drive motor down low to help ensure that the Rift Zone E performs like the analog version, but with a 250W boost. Three levels of power give riders options to balance electric power, speed and range. Electric assist up to 20mph in the US, 25km/h in Europe.

Suspension Setup

REAR SHOCK SETUP

Recommended Sag = 30%/19.5mm

Step 1: Set correct pressure in rear shock.

Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).

Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.

Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.

Step 5: Adjust rebound setting to ensure proper control.

FORK SETUP

Marin recommends that all bikes front and rear suspension feel balanced

Step 1: After rear sag is set follow the recommended pressure from the fork manufacturer.

Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.

Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.

X-Fusion 02 PRO R

Doplňující informace