Marin Alpine Trail E2 (tan/black)

Marin Alpine Trail E2 (tan/black)

The Alpine Trail E will take you further and faster, and let you tackle the most demanding trails both uphill and downhill.

POWER-ASSISTED MOUNTAIN BIKING

POWERFUL BOTH CLIMBING AND DESCENDING, EVEN IN THE MOST DEMANDING TERRAIN

MAXIMISING FUN

The Alpine Trail E will take you further and faster, and let you tackle the most demanding trails both uphill and downhill.

Key improvements over the Alpine Trail E1:

• Shimano STEPS EP8 drive system and 630 Wh battery
• Fox 38 / Float DHX2 Performance Elite suspension
• 12-speed Shimano XT/SLX drivetrain with a 10-51 tooth cassette
• Shimano SLX brakes with four-piston calipers
• Deity Ridgeline handlebars and Copperhead stem

Geometry

All lengths in millimetres

Suspension Setup

REAR SHOCK SET UP

Recommended Sag = 30%/19.5mm

Step 1: Set correct pressure in rear shock.

Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).

Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.

Step 4: Measure sag (from o-ring to seal of shock). If it does not match the bikes recommended sag in millimetres, repeat the process.

Step 5: Adjust the rebound setting to ensure proper control.

FORK SET UP

Marin recommends that front and rear suspension on all bikes feel balanced

Step 1: After rear sag is set, follow the recommended pressure from the fork manufacturer.

Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced. If the front does not match the rear, add or release pressure.

Step 3: Once the bike feels balanced, adjust the rebound damping to ensure proper control.

Fox Float DHX2

Additional information